- Home
- Capabilities
- Equipment and materials
Presses and materials
Electric presses from 20 to 610 tons and more than 150 thermoplastic materials, run in Springville, Indiana. The right press and the right resin, matched to your part.
Injection molding presses
Our floor in Springville runs mainly Toshiba all-electric presses, with Shibaura and Nissei electrics and a few hydraulic and vertical machines. Clamp tonnage sets the size of part and tool a press can hold; shot capacity is the most plastic it can inject in one cycle.
| Clamp (tons) | Make | Shot capacity (oz) | Type | Qty |
|---|---|---|---|---|
| Under 100 tons26 presses | ||||
| 20 | Toshiba | 0.46 | Electric | 2 |
| 55 | Toshiba | 1.8 | Electric | 4 |
| 55 | Toshiba | 2.8 | Electric | 2 |
| 60 | Toshiba | 2.3 | Hydraulic | 1 |
| 65 | Toshiba | 2.9 | Electric | 2 |
| 85 | Shibaura | 2.5 | Electric | 2 |
| 85 | Toshiba | 2.5 | Electric | 5 |
| 85 | Toshiba | 2.8 | Electric | 6 |
| 85 | Engel | 3.7 | Hydraulic, vertical | 1 |
| 90 | Toshiba | 4.8 | Hydraulic | 1 |
| 100 to 199 tons20 presses | ||||
| 110 | Toshiba | 4.2 | Electric | 5 |
| 110 | Toshiba | 5.3 | Electric | 1 |
| 110 | Toshiba | 5.9 | Electric | 1 |
| 125 | Engel | 3.7 | Hydraulic, vertical | 1 |
| 140 | Toshiba | 5.1 | Electric | 1 |
| 140 | Toshiba | 5.3 | Electric | 4 |
| 140 | Toshiba | 6.5 | Electric | 3 |
| 180 | Toshiba | 8.3 | Electric | 2 |
| 180 | Toshiba | 11.5 | Electric | 1 |
| 190 | Toshiba | 8.1 | Hydraulic | 1 |
| 200 to 399 tons21 presses | ||||
| 200 | Toshiba | 5.3 | Electric | 1 |
| 200 | Shibaura | 10.3 | Electric | 1 |
| 200 | Toshiba | 10.3 | Electric | 7 |
| 309 | Nissei | 18.4 | Electric | 2 |
| 310 | Toshiba | 19.1 | Electric | 2 |
| 310 | Toshiba | 37.5 | Electric | 1 |
| 390 | Nissei | 18.4 | Electric | 1 |
| 390 | Toshiba | 19.1 | Electric | 5 |
| 390 | Toshiba | 27.1 | Electric | 1 |
| 400 tons and up1 press | ||||
| 610 | Toshiba | 61 | Electric | 1 |
More than 150 thermoplastics
From commodity resins to high-temperature engineered grades, we mold the materials automotive, lighting, electrical, and industrial programs call for.
- Nylon (PA)Unfilled and filled grades, up to high-temperature engineered nylons
- Acrylic (PMMA)Polymethyl methacrylate
- Polycarbonate (PC)Polycarbonate
- ABSAcrylonitrile butadiene styrene
- ABS-PCPolycarbonate and ABS blend
- Polypropylene (PP)Polypropylene
- Acetal (POM)Filled and unfilled
- TPEThermoplastic elastomer
- TPVThermoplastic vulcanizate
- TPUThermoplastic polyurethane
- TPOThermoplastic polyolefin
- PPE/PSPolyphenylene ether and polystyrene blend
- PBTPolybutylene terephthalate
- HIPSHigh-impact polystyrene
- LDPE / HDPELow- and high-density polyethylene
- ASAAcrylonitrile styrene acrylate
- PVCPolyvinyl chloride
Resin suppliers
We work directly with our raw material suppliers to buy competitively for the volumes we run, which lets us bring in smaller quantities at strong pricing.
- Adell Plastics
- Advanced Thermoplastics
- Amco Plastic Materials
- Avient
- Channel Prime Alliance
- Chase Plastics
- DuPont
- Entec
- International Polymer Corp
- Kopla America
- LyondellBassell
- M. Holland
- Mitsubishi International
- Nexeo Plastics
- Performance Resin
- Roehm America
- Sabic
- Sankyo America
- Ticona Polymers
- Toyota Tsusho America
- Trinseo
- Washington Penn
Need us to run something missing from this list? Contact engineering.
Capabilities videos
A look at the floor and what we do with it. Videos load from YouTube only when you press play.
